- Fits 2015-2023 Mustang GT 5.0 also fits Voodo and Predator 10% Stronger over standard Primary Chains Listing is for Pair Will not work with Gen1 Timing Components
- Gen1 Coyote Primary Timing Chains (Pair) Proven to hold 3000+ hp Will only work with Gen1 Timing Components, please see other listing for Gen2/Gen3/Voodo/Predator
- Gen4 F150 HD Secondary Timing Chains Pair of Upgraded HD Secondary Timing Chains for the Gen4 F150 Platform Only Fits Gen4 F150 Coyote
- Coyote Secondary Tensioners Full Length style Check Other Listing for Upgraded Tensioner Guides Sold Each
- Coyote Primary Chain Tensioners (Pair) HD Boss Style Tensioners Make sure to check primary guides for fitment... guides need to have relief for the stop, or remove the stop from the tensioners... failure to do so will result with the arm breaking off Fits Gen1,Gen2,Gen3,Voodo,Predator
- Replacement Spark Plug Tubes for Coyote Cylinder Heads Great for replacing damaged spark plug tubes These are a press interference fit Fits Gen1,Gen2,Gen3,Voodo,Predator Sold Each
- Coyote Heavy Duty Green Link Secondary Chains (Pair) Must have for higher horsepower builds Coyote, F150, GT350, GT500, Predator, Voodo Fits Gen1,Gen2,Gen3, Voodo, Predator Will not work on Gen4 F150 Timing Chains, Pro Series, Single Row, 54 Link, IWIS Seamless Roller, Ford, Coyote, Pair
- Winberg Billet Crankshaft for Coyote Stock Stroke 3.650 2.086 Stock Rod Journals 2.656 Stock Main Journals Counterweight Clearance for 5.850 or Longer Rod Balanced to 1700 Bob Weight In stock and Ready to Ship
- Sale!FORD COYOTE 5.0L - DOHC 32 VALVES - 2015-2017 F6345 E 1.250 Head Dia .235 Stem Dia 4.275 Overall Length .300 Tip Length 20° Taper Flo. 3 Radial Groove. Stock. Super Alloy F6346 I 1.470 Head Dia .236 Steam Dia 4.720 Overall Length .360 Tip Length 12° Super Flo. 3 Radial Groove. Stock. Special Alloy This listing is for 16 Intake and 16 Exhaust valves. Ferrea 6000 Series for a Gen2 Coyote
- Sale!
For Ford Coyote 5.0L 2010-2015 Dual Springs Kit includes the following: - Dual Springs #S10146 (32) - Titanium Retainers #E11136 (32) - Seat Locators #SL1148 (32)
Kit is missing the SL1128 Hat Seals!!! This is huge savings on the kit. You will need to purchase hat seal or valve seals to make the kit complete - Sale!
BoostLine Connecting Rods 5.933 Length
Coyote, 4.6 2v/3v/4v
Connecting Rod Material:Chromoly 4340 steelAdvertised Horsepower Rating:2,000 hpAdvertised RPM Rating:10,000 rpmThe patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. - Sale!In stock and Ready to Ship ARP Head Stud kit for Early Gt350 Voodo Engines 2015-2018 Modeal ARP2000 Material Short 12mm Head Studs Will not Fit Gen1/Gen2/Gen3 Coyotes, will only work with 2015-2018 GT350 Voodo Blocks
- Sale!In Stock and Ready to Ship! Arp Custom Age 625+ 12mm Head Stud Kit for Coyote Ideal for High Horsepower Builds Will fit Gen1/Gen3 and Predator Engines Will not fit Gen2 or Early Model GT350 Block with Short 12mm Studs
- Sale!Custom Billet Coyote Valve Covers made in House at TKM Performance Fits GEN1/GEN2/GT350/Predator Will not Fit GEN3 or GEN4 Coyote Oil Fill Cap is Set up for 16ORB and is included, Mounting Bolts and Washers are also included, Gaskets, and Adaptors are optional Valve Covers are Designed to be Used with the Predator Green Valve Cover Gaskets, and Coyote Spark Plug Seals... Dip Stick is Deleted Valve Covers are set up to be used with Cunningham Brothers Burndown Tubes or Adaptors to run a 10orb Fitting, which can be purchased with or without Will not work with VCT!!!!
- Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Same Guides that are used on RTR Drift Team, Cleetus's Neighbor, and McFlurry (We all know how tough these guys are on stuff) and many others Custom blend of Wear Resistant Acetal Polymer CNC Machined No Wear Liners Needed Were only available for in house builds, now we are offering them to everyone! Fits GEN 1/2/3 & GT350/Predator Please Note: These are a wear item and need to be checked for wear... Failure to do so can cause alot of damage
- Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Custom blend of Wear Resistant Acetal Polymer CNC Machined Fits GEN 1/2/3 & GT350/Predator Secondary Tensioners
- Billet Aluminum Main Caps for Coyote Will work on Gen 1/2/3 and GT350/Predator Blocks Uses standard Coyote Main Bearings and Hardware Will require Line Bore for fitment Made from 6061 Material We have made 2500+whp with this Main Caps on a Production Tkm Prepped Block and Stock Crank Machined in house at TKM Performance
- Custom 1' spacer for Modular/Coyote engines and a lockup transmission Starter Holes are Tapped so no need to get longer starter bolts Dowels included 16mm x 50mm x2 Will need 1' longer bell housing bolts Made in House at TKM Performance
FORD COYOTE SWAP OIL PAN KIT
1979-2004 Mustang 5.0L Coyote engine swap. Fits Gen 1 and Gen 2 Coyote engines 2011-2017 model yearsHolley's new Gen1/Gen2 Coyote oil pan makes your Fox body Mustang swap easier. The oil pan design maintains the oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications. The new design installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics. A proprietary design pick-up tube/O-ring and lower sump baffle plate are included. The 302-50 comes equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed). The new low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets) and specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR for 1979-2004 Mustangs. Application fitment is compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs. The steel construction is hand-welded for strength, longevity and good looks. The zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets).
- Also fits specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR.
- Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications.
- Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics.
- The design includes a bung on the left side of the sump for the stock Mustang Coyote oil level sensor.
- Proprietary design pick-up tube/O-ring and lower sump baffle plate are included.
- Equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed).
- 100% quality hand-welded construction for strength, longevity and good looks.
- Zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Fitment compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs.
- Oil pan fits 2011-2017 Coyote engines
- Custom 12mm Coyote Head Studs Head Stud Kit for Ford Coyote 5.0L, 12mm threads, 12pt
nuts, 6304 material 220,000 psi, black oxide finish Made in the USA Manufactured for TKM by Point One Not for use in Gen1 GT350 Blocks We also have a H11 Material 250,000 psi tumble finish option - TKM Custom Coyote Lift PlatePowder Coated BlackTKM Laser EtchedWill not clear di injector rail boltsMade in House at TKM and Hand Welded by "The" Kevin Mullins
- ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application
- Includes:
- Full set (16) of billet replacement cam caps (unless Gen3)
- Gen3 Caps will be a set of (14), will have to reuse fuel pump cap and front caps
- Integrated dowel pins with tighter tolerances
- Front caps not included (but can be added for $350.00) Not Available for Gen3
- Line bore is required
- Cnc line bore installation of cam caps for additional $650.00 plus any other work performed
Please note: Need to make sure the dowel holes in the heads are the same size, or if they are small and large!!!! Front Cam Caps are designed to be used with the RGR Secondary Timing Kit
