Includes:

• Billet Made in House
• Designed to use with Holley 554-127
• Accepts all factory Hardware and will work in a Gen 4 Timing Cover with Cam Sensor Hole

Please note: TKM Parts are made in house not out sourced!!!  We appreciate your patience!

Includes:

• Billet Made in House
• Designed to block off when running a external crank wheel
• Accepts all factory Hardware and includes oring

Please note: TKM Parts are made in house not out sourced!!!  We appreciate your patience!

TKM Performance LS Motor Plates   In Stock and ready to Ship!

ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application

FORD COYOTE SWAP OIL PAN KIT

1979-2004 Mustang 5.0L Coyote engine swap. Fits Gen 1 and Gen 2 Coyote engines 2011-2017 model years

Holley's new Gen1/Gen2 Coyote oil pan makes your Fox body Mustang swap easier. The oil pan design maintains the oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications. The new design installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics. A proprietary design pick-up tube/O-ring and lower sump baffle plate are included. The 302-50 comes equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed). The new low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets) and specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR for 1979-2004 Mustangs. Application fitment is compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs. The steel construction is hand-welded for strength, longevity and good looks. The zinc plated finish provides corrosion resistance on the inside and outside of the pan.

• Low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets).
• Also fits specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR.
• Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications.
• Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics.
• The design includes a bung on the left side of the sump for the stock Mustang Coyote oil level sensor.
• Proprietary design pick-up tube/O-ring and lower sump baffle plate are included.
• Equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed).
• 100% quality hand-welded construction for strength, longevity and good looks.
• Zinc plated finish provides corrosion resistance on the inside and outside of the pan.
• Fitment compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs.
• Oil pan fits 2011-2017 Coyote engines

 

Oil Pan, Steel, Clear Zinc, Dart LS Next Gen 3 Skirted Block, Early/Swap F-Body Race Baffled, Spin-On Oil Filter Adapter that Accepts 22mm thread Dart LS Next Gen 3 skirted engine blocks. Oil pan includes a spin-on oil filter adapter MOR-22463 and is designed to be used with a 1998-2002 F body dipstick and tube GM numbers 12628771 and 12551581 Moroso 24152 Pickup Tube for 20152 Oil Pan not included Steel, Wet Sump, 7 Quart Capacity, 6" Deep Early F-Body/Swap Engine Application: Dart LS Next Gen 3 Skirted Block Fits: ’67-’92, ’10-’15 Camaro, ’68-’78 Nova, ’65-’72 Chevelle, ’53-’96 Corvette, ’78-’88 G-Body, and GM S10/S15 Two Wheel Blazer/Truck, Can also be used in additional applications; check dimensions

• Clears a 4.25" stroke and has a 7 Quart Capacity
• Three trap door assembly and removable windage tray for improved oil control
• Fabricated steel with clear zinc finish
• Includes billet aluminum 22mm spin-on filter mount with 1/4" NPT sensor port
• Compatible with LS car application dipstick

Includes:

• full set (16) of billet replacement cam caps for gen 1 or gen 2 coyote
• integrated dowel pins with tighter tolerances
• front cap not replaced (but can be added for $260.00)
• line bore is required
• add arp cam cap bolts for a additional $115.99
• cnc line bore installation of cam caps for additional $650.00

Please note: need to know if for gen1 or gen2 unless installation is being done at TKM