- full set (16) of billet replacement cam caps for gen 1 or gen 2 coyote
- integrated dowel pins with tighter tolerances
- front cap not replaced (but can be added for $260.00)
- line bore is required
- add arp cam cap bolts for a additional $115.99
- cnc line bore installation of cam caps for additional $650.00
Includes:- Sale!
Banner w/ TKM Logo- Thick Black Vinyl for durability
- Large 3' X 5'
- Stainless Steel eyelets for hanging
The Lamb camshaft is the little brother of the "Black sheep" Don't let the name fool you!!!! This little camshaft will help you meet your goal with the right combo Designed for the 4.8/5.3/6.0 Lift is .615 with a 1.7 rocker degree to a 112 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo
The TKM Bigstick is rowdy! The perfect n/a camshaft for the ls series Lift is .625 with a 1.7 rocker Degree to a 109 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo- Sale!
TKM Hub Shirt Style: Original Brand: Next level Available in Small, Med, Large, Extra Large, 2XL, 3XL 
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application
TKM Moisture Wicking Shirts
TKM Custom American Flag Decals Four Size Options Door Decal 48x20 (comes as a set) Large 17.5x8 Med 11x5 Small 7x3.5- Sale!Out of stock
Blue/Graphite Mesh Flex Fit TKM Performance Hat Brand: Flexfit New swag at TKM 
TKM Performance LS Motor Plates In Stock and ready to Ship!
Includes:- Billet Made in House
- Designed to use with Holley 554-127
- Accepts all factory Hardware and will work in a Gen 4 Timing Cover with Cam Sensor Hole
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
- Sale!
TKM Custom Tire Shade Sold Individually 
Includes:- Billet Made in House
- Designed to block off when running a external crank wheel
- Accepts all factory Hardware and includes oring
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
- Sale!
BoostLine Connecting Rods 5.933 Length
Coyote, 4.6 2v/3v/4v
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection
TKM Black/American Flag Fleece Hooded Sweatshirt Brand: Sprint Fleece Hooded Sweatshirt 11112
TKM Stone Grey/American Flag T-Shirt Brand: Next Level Unisex Short Sleeve Crew 3227
GM Factory Timing Cover Assembly
Kit Includes:Gen 4 Timing Cover Powder Coated Black with TKM Laser Etched, CNC to clear double roller timing chain set up
GM Cam Position Sensor and Harness GM Front Crankshaft Seal GM Timing Cover Gasket GM Cover BoltsNot for use on LS7 or LS3 Dry Sump Long Snout Cranks
TKM Custom Coyote Lift PlatePowder Coated BlackTKM Laser EtchedWill not clear di injector rail boltsMade in House at TKM and Hand Welded by "The" Kevin Mullins- Sale!
TKM Jacket with Logo embroidered on the left chest. *** IN STOCK NOW *** Brand : DRI DUCK 90/10 Poly/Spandex Motion Jacket 
Custom 12mm Coyote Head Studs Head Stud Kit for Ford Coyote 5.0L, 12mm threads, 12pt
nuts, 6304 material 220,000 psi, black oxide finish Made in the USA Manufactured for TKM by Point One Not for use in Gen1 GT350 Blocks We also have a H11 Material 250,000 psi tumble finish option- Sale!
Custom TKM Ati Mandrel Hard Anodized BlackDesigned to work with ATI balancers F-body/Y-body and Coyote and othersDoes not come with Pulley, will work with 1 inch bore pulleys and 1/8th inch key - Sale!
Callies Magnum- Premium Ultra Case Heat Treated SAE 4340 Steel
- New Design 8 Counter Weight Forging
- Main Journal Dia. 2.749″ 351 Cleveland
- Rod Journal 2.100″
- Rod Length 6.200″
- Stroke 4.000″
- Enhanced rod oiling through the use of Main Bearing Oil Hole Lead-ins
- Gun Drilled Mains
- All Rod Journals Lightened
1/2-20 Shanked Titanium Lug Nuts Set of 10 .400 Shank link 12 point open ended
TKM Mystery Tee Style: Varies Brand: Varies Available in Small, Med, 3XL
TKM American Flag T-Shirt Available in Red, Black, Granite in Small thru 3XL - 4XL available in Red only Brand: Comfort Colors - Garment- Dyed T-Shirt 1717
TKM Eff Around and Find Out T-shirt Available in Black Frost and Grey Frost (Sizes Small - 4XL) Brand: District Tee
TKM Madd Scientist Tuner T-shirt Available in Black, Royal, Red and Heather Grey (Sizes Small - 4XL) Also Select Youth Sizes Brand: District Tee
In stock and ready to shipFORD COYOTE HP KIT, NTK O2, USCAR INJ
HP EFI ECU with Power Harness, Main Harness, Coil Harness, Injector Harness and Sensors includes NTK Oxygen Sensor (Does not include Ti-VCT Controller or Harnesses)Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked cams? Unlock the full potential of your high revving power plant with the Holley EFI Plug and Play Coyote Ti-VCT Control Module.
- Now supports 2015-2017 Coyote engines
- HP EFI kits available
- Plug and Play main harness for 2011-2017 Coyote engines w/ stock cam shafts using stock coils (558- 110)
- Plug and Play main harness for 2011-2017 Coyote engines w/ stock cam shafts using Holley EFI coils (558-122)
- Compatible with HP or Dominator EFI
- Pre-calibrated Ford sensor drop downs in the Holley EFI software
- Ti-VCT Cam control down to 400 RPM
- Commanded timing matched within 1 degree
- User programmable tables enable the end user to fine tune aftermarket Ti-VCT compatible camshafts
- 4 Built in Diagnostic LEDS make diagnostics easy in the event of a cam or crank sensor failure
- Integrated stock cam position tables – eliminate tuning guess work, optimal drive-ability and power right out of the box
- Main harnesses come terminated with Ford TPS and IAC connectors, making it easy to convert from a DBW throttle body to a manual throttle body
- Installation of an external MAP sensor is required, we recommend part number 538-13 for N/A applications
- Main Harnesses includes a Power Tap Connector, as a convenient source for power and grounds when adding additional sensors or actuators
- CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high speed data transfer and diagnostics
FORD COYOTE SWAP OIL PAN KIT
1979-2004 Mustang 5.0L Coyote engine swap. Fits Gen 1 and Gen 2 Coyote engines 2011-2017 model yearsHolley's new Gen1/Gen2 Coyote oil pan makes your Fox body Mustang swap easier. The oil pan design maintains the oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications. The new design installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics. A proprietary design pick-up tube/O-ring and lower sump baffle plate are included. The 302-50 comes equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed). The new low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets) and specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR for 1979-2004 Mustangs. Application fitment is compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs. The steel construction is hand-welded for strength, longevity and good looks. The zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets).
- Also fits specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR.
- Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications.
- Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics.
- The design includes a bung on the left side of the sump for the stock Mustang Coyote oil level sensor.
- Proprietary design pick-up tube/O-ring and lower sump baffle plate are included.
- Equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed).
- 100% quality hand-welded construction for strength, longevity and good looks.
- Zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Fitment compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs.
- Oil pan fits 2011-2017 Coyote engines
Oil Pan, Steel, Clear Zinc, Dart LS Next Gen 3 Skirted Block, Early/Swap F-Body Race Baffled, Spin-On Oil Filter Adapter that Accepts 22mm thread Dart LS Next Gen 3 skirted engine blocks. Oil pan includes a spin-on oil filter adapter MOR-22463 and is designed to be used with a 1998-2002 F body dipstick and tube GM numbers 12628771 and 12551581 Moroso 24152 Pickup Tube for 20152 Oil Pan not included Steel, Wet Sump, 7 Quart Capacity, 6" Deep Early F-Body/Swap Engine Application: Dart LS Next Gen 3 Skirted Block Fits: ’67-’92, ’10-’15 Camaro, ’68-’78 Nova, ’65-’72 Chevelle, ’53-’96 Corvette, ’78-’88 G-Body, and GM S10/S15 Two Wheel Blazer/Truck, Can also be used in additional applications; check dimensions- Clears a 4.25" stroke and has a 7 Quart Capacity
- Three trap door assembly and removable windage tray for improved oil control
- Fabricated steel with clear zinc finish
- Includes billet aluminum 22mm spin-on filter mount with 1/4" NPT sensor port
- Compatible with LS car application dipstick
New TKM Hoodies just in time for the cold weather! Available in Red and Black S-4xl
The Popular Mad Scientist Design now available in Blue/Charcoal Hoodies from Small to 4XL
Custom 1' spacer for Modular/Coyote engines and a lockup transmission Starter Holes are Tapped so no need to get longer starter bolts Dowels included 16mm x 50mm x2 Will need 1' longer bell housing bolts Made in House at TKM Performance
Billet Aluminum Main Caps for Coyote Will work on Gen 1/2/3 and GT350/Predator Blocks Uses standard Coyote Main Bearings and Hardware Will require Line Bore for fitment Made from 6061 Material We have made 2500+whp with this Main Caps on a Production Tkm Prepped Block and Stock Crank Machined in house at TKM Performance
Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Custom blend of Wear Resistant Acetal Polymer CNC Machined Fits GEN 1/2/3 & GT350/Predator Secondary Tensioners
Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Same Guides that are used on RTR Drift Team, Cleetus's Neighbor, and McFlurry (We all know how tough these guys are on stuff) and many others Custom blend of Wear Resistant Acetal Polymer CNC Machined No Wear Liners Needed Were only available for in house builds, now we are offering them to everyone! Fits GEN 1/2/3 & GT350/Predator