- Replacement Spark Plug Tubes for Coyote Cylinder Heads Great for replacing damaged spark plug tubes These are a press interference fit Fits Gen1,Gen2,Gen3,Voodo,Predator Sold Each
- Coyote Secondary Tensioners Full Length style Check Other Listing for Upgraded Tensioner Guides Sold Each
- Includes:
- Billet Made in House
- Designed to use with Holley 554-127
- Accepts all factory Hardware and will work in a Gen 4 Timing Cover with Cam Sensor Hole
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
- Includes:
- Billet Made in House
- Designed to block off when running a external crank wheel
- Accepts all factory Hardware and includes oring
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
- TKM Custom Coyote Lift PlatePowder Coated BlackTKM Laser EtchedWill not clear di injector rail boltsMade in House at TKM and Hand Welded by "The" Kevin Mullins
- Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Custom blend of Wear Resistant Acetal Polymer CNC Machined Fits GEN 1/2/3 & GT350/Predator Secondary Tensioners
- Fits 2015-2023 Mustang GT 5.0 also fits Voodo and Predator 10% Stronger over standard Primary Chains Listing is for Pair Will not work with Gen1 Timing Components
- Gen1 Coyote Primary Timing Chains (Pair) Proven to hold 3000+ hp Will only work with Gen1 Timing Components, please see other listing for Gen2/Gen3/Voodo/Predator
- Sale!Custom TKM Ati Mandrel Hard Anodized BlackDesigned to work with ATI balancers F-body/Y-body and Coyote and othersDoes not come with Pulley, will work with 1 inch bore pulleys and 1/8th inch key
- Coyote Primary Chain Tensioners (Pair) HD Boss Style Tensioners Make sure to check primary guides for fitment... guides need to have relief for the stop, or remove the stop from the tensioners... failure to do so will result with the arm breaking off Fits Gen1,Gen2,Gen3,Voodo,Predator
- Sale!
Gen4 LS Timing Cover
Includes:Gen 4 Timing Cover Powder Coated Black with TKM Laser Etched, CNC to clear double roller timing chain set up, timing cover only!
Not for use on LS7 or LS3 Dry Sump Long Snout Cranks - Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Same Guides that are used on RTR Drift Team, Cleetus's Neighbor, and McFlurry (We all know how tough these guys are on stuff) and many others Custom blend of Wear Resistant Acetal Polymer CNC Machined No Wear Liners Needed Were only available for in house builds, now we are offering them to everyone! Fits GEN 1/2/3 & GT350/Predator Please Note: These are a wear item and need to be checked for wear... Failure to do so can cause alot of damage
- Sale!The PAC-1219 Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .625" lift. This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in. The PAC-1219s are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs. Type:Beehive Valve SpringsSpring Diameter Bottom (in.):1.307Spring Diameter Top (in.):1.072Spring I.D. Bottom (in.):0.885Spring I.D. Top (in.):0.650Max Lift (in.):0.625Load (lbs) @ Installed Height (in):135 @ 1.800Open Load (lbs) @ Open Height (in.):348 @ 1.175Coil Bind (in.):1.100Rate (lbs/in.sq):340Quantity:Sold as a set of 16
- Coyote Heavy Duty Green Link Secondary Chains (Pair) Must have for higher horsepower builds Coyote, F150, GT350, GT500, Predator, Voodo Fits Gen1,Gen2,Gen3, Voodo, Predator Will not work on Gen4 F150 Timing Chains, Pro Series, Single Row, 54 Link, IWIS Seamless Roller, Ford, Coyote, Pair
- Gen4 F150 HD Secondary Timing Chains Pair of Upgraded HD Secondary Timing Chains for the Gen4 F150 Platform Only Fits Gen4 F150 Coyote
- Sale!Cometic Head Gasket MLS Style 3.701 in. Bore .040 in. Compressed Thickness 4.6 Modular Head Gaskets C5503-040 and C5502-040
- Sale!Cometic MLS Gaskets for GEN3 Coyote Cylinder Head Gaskets .051" Thickness 94.5MM Bore MLS HEAD GASKET , FORD 5.0 COYOTE 2018 Pair of Head Gaskets
- Sale!Cometic MLS Gaskets for GEN3 Coyote Cylinder Head Gaskets .040" Thickness 94.5MM Bore MLS HEAD GASKET , FORD 5.0 COYOTE 2018 Pair of Head Gaskets
- Cometic MLS Head Gaskets GEN2 Coyote MLS, Multi-Layer Stainless Steel 3.701 in. Bore 0.040in. Thickness Left and Right Head Gaskets
- Ford 5.0L Gen-4 Coyote .045" Thickness 94.5mm Bore Pair of Cometic Head Gaskets
- Custom Carb Intake Style Spacer with Burst Panel available in 4150 and 4500 2.4" Tall Comes with Burst Plate
- ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application
- Includes:
- Full set (16) of billet replacement cam caps (unless Gen3)
- Gen3 Caps will be a set of (14), will have to reuse fuel pump cap and front caps
- Integrated dowel pins with tighter tolerances
- Front caps not included (but can be added for $350.00) Not Available for Gen3
- Line bore is required
- Cnc line bore installation of cam caps for additional $650.00 plus any other work performed
Please note: Need to make sure the dowel holes in the heads are the same size, or if they are small and large!!!! Front Cam Caps are designed to be used with the RGR Secondary Timing Kit
